1/8 npt bracket

Product Information
Sensor and hose fittings NOT included, gray angle bracket with integrated blue coupling IS what you are buying here/ End user will need to obtain one more M6x1 (6mm diameter,1mm thread pitch) screw to mount the rear of the isolator to whatever you are going to mount it to. We can't stock every unknown screw length that each installation may require. These are easily available at ACE hardware etc. We made this bracket originally for our rally cars, oil pressure sensors mounted directly to the engine were vibrating and fatiguing over time. Remote mounting eliminates that problem.Sensors last longer when they are isolated from vibration and heat. For MAP sensor it eliminates tapping and risking putting metal shavings into your intake. Specs: M6 countersunk stainless steel mounting screw. 1/8" NPT female x 1/8" NPT female coupling Anodized bracket and coupler, some anodizing is removed from coupler during press fit process. Coupling is press fit at the factory (interference fit, with Loctite retaining compound) (OK, the Loctite is over-kill ,but I'm an anal mechanical engineer ;-) .) Use it for: Map sensors Oil pressure sensors E-MAP/T.I.P (exhaust manifold/pre-tubine pressures) combine with our exhaust pressure probe kit. here:Automotive NEW items general hose strain relief,mounting (AN, "Aeroquip" type or other)

Price: $24.00

• Tell a Friend