MAC Mount

Product Information
free shipping! MADE in the USA . FINALLY a well designed bracket compatible with : AEM,Autronic,MAC,E-boost,Turbosmart Tru boost. (Any solenoid with the same mounting dimensions as the blue/green MAC 3 port 35 series solenoid valve) ONE mounting bracket and vibration isolator. Note the 2nd bracket in the picture is just so you can see it better. Valve NOT included in this listing. You will need to obtain one more countersunk M6x1 screw to mount the rear of the isolator to whatever you are going to mount it to. We can't stock every unknown screw length that each installation may require. These are easily available at ACE hardware etc. Bracket Features: (This is THE best MAC 3 port bracket we know of.) TWO mounting possibilities, back mount or bottom mount. Low space design. Only one 6mm (~1/4") hole needed to mount to your car. "L " shape supports valve on both sides taking the load away from the smallish MAC mounting screws. Lightweight Aluminum ,3/16" thickness.Anodized matte grey. 2x stainless steel #5 MAC mounting screws included. 1x stainless steel M6 countersunk screw included to mount the bracket to the vibration isolator. 1x high temp (175 F),vibration isolator included. Has two female M6x1mm tapped holes. Fully corrosion proof. Will not fatigue like other "Tab" designs.Neither the bracket or the small MAC screws will fatigue or come loose if installed correctly. Mounting hole is aligned with mass center, for best durability,minimizes rotational forces. The ultimate installer will also apply a dab of silicone etc between valve and bracket as a "bed" to maximize surface contact with the bracket. Optional but what we do on rally cars etc.

Price: $19.00

• Tell a Friend