back pressure kit

Product Information
FREE DOMESTIC priority mail shipping. International email us first: sales@circuitse7en.net This is a full kit that allows a tuner/mechanic to measure back pressure through an existing Oxygen sensor hole. Or for permanent tuner EFI instalattion. Features: extender tube keeps the heat away from the flexible tubing, the only one on the marker like this. since the tubing stays cool it allows permanent installation, not temporary, this is great for use with Engine management systems that use Exhaust back pressure as an input parameter (Autronic etc) steel tubing, conducts less than copper and has highest fatigue life to resist vibration. "clockable" fitting designs allows orienting the tube in any rotation. tubing is annealed so that it can be bent as needed, multiple times. includes adapter fitting for oxygen sensor,heat isolating extension tube,9 feet of tubing,0-15 psi gauge. adapter fitting fits all 18mm oxygen sensor bungs (MOST cars have this size fitting,some jet ski's and some late model motorbikes do not. includes a spare (pre curved) bung (not shown) and plug, in case your exhaust does not have an exisiting bung. You can also order a stainless steel bung sepratley if needed. The sensor adapter has a calibrated orficice to minimize needle fluctuation from exhaust pulses. (not necessary but a nice feature). Can also be used to measure other pressures.

Price: $41.90

• Tell a Friend