MAC 35A-AAA-DDBA-1BA

Product Information
WHY pay more than you have to?

This MAC valve has the new heavier duty wires.The  older style valve   had brown thin wires,the new wires are black ,thicker and much more flexible and withstand heat better.

This is the same 3 port boost control used by many boost control manufacturers ,we buy in high volume from the same valve manufacturer as they do and it is the exact same valve ... minus the sticker and the inflated price!!!.
Can be used as a 3 port or 2 port solenoid. Includes (2) 3/16" brass hose barb fittings.  All the Ports are 1/8 NPT so you can use any common fitting that you want including AN-adapters.  Also includes one sintered high flow air muffler/vent filter. The sintered filter makes the installation easier & cleaner because you don't have to run another hose to your air cleaner.

The fittings are injcluded (brass).We do not include AN type fittings, as most want the hose barbs and we are aiming to be the lowest cost supplier of these valves,we don't want you to pay extra for something you don't need. If you want AN fittings email us and we can supply them.

This boost control solenoid  will not degrade from  rich fuel mixtures or oil . Very high life and very resistant to sticking from contamination. 

• Leads are 18" long.
•  12 volt DC , polarity not sensitive.
• 5.4 watts
  
• 10-90% duty cycle
  
• 1/8" npt ports
• compatible with many & most boost controllers and ECU's : AEM,Autronic,E-boost etc,Neptune, Hondata,ECtune.
  
• operating range vacume to 120 psi.
• (2 ) 3/16" bhose barbs nipples
• (1) sintered vent/muffler
• This is an industrial quality valve, Autronic,e-boost and AEM have been using them for years on everything from rally cars to drag cars, there is a reason they use this valve, it is very durable and responsive.
• Installation tips will be emailed to the purchaser as soon as the order is placed.
• This valve can be driven by many stock ecu's as well as many aftermarket stand-alones and regular stand alone boost controllers. Much better than GM solenoids etc.
  
• IT IS UP TO the PURCHASER to decide if this valve is suitable for it's intended use the seller will not be responsible for damage of any kind that may occur due to the use of this product!!! There are additional fees for INTERNATIONAL SHIPPING email us BEFORE ordering: sales@circuitse7en.net. If you do not email us first any international order will be cancelled.

Price: $33.21

• Tell a Friend